Art. Nr.: 23503 Kompernaß GmbH Burgstraße 21 D-44867 Bochum Last Information Update · Tietojen tila · Informationsstatus · Tilstand af information · · Stand der Informationen: 07 / 2008 · Ident.-No.: XQ310072008-3 E-23503_XQ310_Cover_LB3.indd 1 21.07.2008 16:25:42 Uhr Orbital sander XQ310 Operation and Safety Notes oRbITaL SaNDER Käyttö- ja turvaohjeet PyöRöHIomakoNE Bruksanvisning och säkerhetsanvisningar PLaNSLIPmaSkIN RySTEPUDSER Brugs- og sikkerhedsanvisninger SCHWINGSCHLEIFER Bedienungs- und Sicherheitshinweise E-23503_XQ310_Cover_LB3.indd 2 21.07.2008 16:25:43 Uhr Before reading, unfold the page containing the illustrations and familiarise yourself with all functions of the device. Käännä ennen lukemista kuvallinen sivu esiin ja tutustu seuraavaksi laitteen kaikkiin toimintoihin. Vik ut bildsidan och ha den till hands när du läser igenom anvisningarna och gör dig bekant med apparatens / maskinens funktioner. Før du læser, vend siden med billeder frem og bliv bekendt med alle apparatets funktioner. , . Klappen Sie vor dem Lesen die Seite mit den Abbildungen aus und machen Sie sich anschließend mit allen Funktionen des Gerätes vertraut. GB / IE / CY FI SE DK GR / CY DE / AT Operation and Safety Notes Käyttö- ja turvaohjeet Bruksanvisning och säkerhetsanvisningar Brugs- og sikkerhedsanvisninger Bedienungs- und Sicherheitshinweise Page Sivu Sidan Side Seite 5 15 25 35 45 55 E-23503_XQ310_Cover_LB3.indd 3 21.07.2008 16:25:43 Uhr 1 2 3 11 10 7 4 5 6 9 6 8 7 a B 9 C d 12 e F E-23503_XQ310_Cover_LB3.indd 4 21.07.2008 16:25:48 Uhr E-23503_XQ310_Cover_LB3.indd 5 21.07.2008 16:25:48 Uhr E-23503_XQ310_Cover_LB3.indd 6 21.07.2008 16:25:48 Uhr Table of Content Introduction Intended use..................................................................................................................Page Features .........................................................................................................................Page Delivery contents ..........................................................................................................Page Technical Data ..............................................................................................................Page 6 6 6 7 7 7 8 8 9 10 10 10 10 10 10 11 General safety advice 1. Workplace safety .....................................................................................................Page 2. Electrical safety ........................................................................................................Page 3. Personal safety .........................................................................................................Page 4. Careful handling and use of electrical power tools ..............................................Page Appliance-specific Safety Instructions ........................................................................Page Original ancillaries / and accessories ........................................................................Page Operation Operation......................................................................................................................Page Switching On and Off ..................................................................................................Page Setting the oscillation speed ........................................................................................Page Attaching a sanding pad .............................................................................................Page Vacuuming dust .............................................................................................................Page Instructions, tips and tricks ...........................................................................................Page Maintenance and Cleaning .......................................................................Page 11 Disposal ......................................................................................................................Page 12 Information Service centre ...............................................................................................................Page 12 Warranty .......................................................................................................................Page 12 Conformity Declaration / Manufacturer .....................................................................Page 13 GB/IE/CY 5 E-23503_XQ310_Content_LB3.indd 5 21.07.2008 16:26:28 Uhr Introduction The following pictograms are used in these operating instructions / on the device: Read instruction manual! Observe caution and safety notes! Caution ­ electric shock! Danger to life! Risk of explosion! Risk of fire! Wear hearing protection, dust protection mask, protective glasses and protective gloves. Safety class II Keep children away from electrical power tools! Risk of loss of life by electric shock from damaged mains lead or mains plug! Protect electrical power tools from moisture! Dust hazard! Dispose packaging and appliance in an environmentally-friendly way! n0 V~ W No load speed Volt (AC) Watts (Effective power) Q Orbital sander XQ 310 Q Features ON / OFF switch Locking button for the ON / OFF switch Release button Dust collection box Adapter (captive) Clamping bars Tensioning lever Sanding plate Sanding Pad Oscillation speed selection Grip surface Reducer Introduction Before using the appliance for the first time familiarize yourself with all functions of the appliance and inform yourself about the correct handling of electrical tools. Please read the following operating instructions carefully. Retain these instructions for future reference. Additionally, pass them on to whoever might acquire the appliance at a future date. Q 1 2 3 4 5 6 7 8 9 10 11 12 Intended use Q The oscillating sander is suited for dry sanding of wood, plastics and paints. Any other use or modification is considered improper use and involves significant accident risks. The manufacturer declines to accept responsibility for damage(s) arising out of usage contrary to the instructions specified below. The appliance is not meant for commercial use. 6 GB/IE/CY Delivery contents 1 Orbital sander XQ 310 15 Sanding pads (5 x grit 60 / 120 / 180), see Fig. F 1 Dust collection box 1 Reducer, see Fig. D 1 Operating manual E-23503_XQ310_Content_LB3.indd 6 21.07.2008 16:26:29 Uhr Introduction / General safety advice Q Technical Data 230 V ~ 50 Hz 310 W n0 6,000 - 11,000 rpm max. approx. 22,000 rpm 2.1 mm approx. 280 x 115 mm II / Nominal voltage: Nominal power: Idle speed: Idle oscillation speed: Oscillation circle: Sanding paper size max.: Protection class: General safety advice WarNING! Read all the safety advice and instructions! Failure to observe the safety advice and instructions may result in electric shock, fire and / or serious injury. KEEP ALL THE SAFETY ADVICE AND INSTRUCTIONS IN A SAFE PLACE FOR FUTURE REFERENCE! Noise and vibration data: Values determined in accordance with EN 60745 The sound pressure level (A-weighted) of the device is typically 71 dB(A). Uncertainty K = 3 dB. The sound level while working can exceed 85 dB (A). Wear ear protection! Evaluated acceleration, typical: Hand / arm vibration ah = 2,149 m / s2 Uncertainty K = 1,5 m / s2 WarNING! The vibration level given in these instructions has been measured in accordance with a standardised measurement procedure specified in EN 60745 and can be used to compare devices. Different uses of the device give rise to different vibration levels and in many cases they may exceed the values given in these instructions. It is easy to underestimate the vibration load if the electrical power tool is used regularly in particular circumstances. Note: If you wish to make an accurate assessment of the vibration loads experienced during a particular period of working, you should also take into account the intervening periods of time when the device is switched off or is running but is not actually in use. This can result in a much lower vibration load over the whole of the period of working. 1. Workplace safety a) Keep your working area clean and clutter-free. Untidy or poorly lit working areas can lead to accidents. b) Do not work with the device in potentially explosive environments in which there are inflammable liquids, gases or dusts. Electrical power tools create sparks, which can ignite dusts or fumes. c) Keep children and other people away while you are operating the electrical tool. Distractions can cause you to lose control of the device. 2. Electrical safety To avoid danger to life from electric shock: a) The mains plug on the device must match the mains socket. The plug must not be modified in any way. Do not use an adapter plug with devices fitted with a protective earth. Unmodified plugs and matching sockets reduce the risk of electric shock. b) avoid touching earthed surfaces such as pipes, radiators, ovens and refrigerators with any part of your body. There is an increased risk of electric shock if your body is earthed. GB/IE/CY 7 E-23503_XQ310_Content_LB3.indd 7 21.07.2008 16:26:29 Uhr General safety advice Keep the device away from rain or moisture. Water entering an electrical device increases the risk of electric shock. d) Do not use the mains lead for any purpose for which it was not intended, e.g. to carry the device, to hang up the device or to pull the mains plug out of the mains socket. Keep the mains lead away from heat, oil, sharp edges or moving parts of the device. Damaged or tangled mains leads increase the risk of electric shock. e) When working outdoors with an electrical power tool always use extension cables that are also approved for use outdoors. The use of an extension cable suitable for outdoor use reduces the risk of electric shock. f) Use a residual current device (rCD) for protection if operating the electrical power tool in a moist environment is unavoidable. The use of an RCD reduces the risk of electric shock. c) you carry the device with your finger on the ON / OFF switch or with the device switched on. d) remove any setting tools or spanners before you switch the device on. A tool or spanner left attached to a rotating part of a device can lead to injury. e) avoid placing your body in an unnatural position. Keep proper footing and balance at all times. By doing this you will be in a better position to control the device in unforeseen circumstances. f) Wear suitable clothing. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves clear of moving parts. Loose clothing, jewellery or long hair can become trapped in moving parts. g) If vacuum dust extraction and collection devices are fitted do not forget to check that they are properly connected and correctly used. The use of these devices reduces the hazard presented by dust. 3. Personal safety a) remain alert at all times, watch what you are doing and always proceed with caution. Do not use the device if you are tired or under the influence of drugs, alcohol or medication. One moment of carelessness when using the device can lead to serious injury. b) Wear personal protective equipment and always wear safety glasses. The wearing of personal protective equipment such as dust masks, non-slip safety shoes, safety helmets or ear protectors, appropriate to the type of electrical power tool used and work undertaken, reduces the risk of injury. c) avoid unintentional operation of the device. Check that the electrical power tool is switched off before you connect it to the mains, pick it up or carry it. Accidents can happen if 8 GB/IE/CY 4. Careful handling and use of electrical power tools a) Do not overload the device. always use an electrical power tool that is intended for the task you are undertaking. By using the right electrical power tool for the job you will work more safely and achieve a better result. b) Do not use an electrical power tool if its switch is defective. An electrical power tool that can no longer be switched on and off is dangerous and must be repaired. c) Pull the mains plug out of the socket before you make any adjustments to the device, change accessories or when the device is put away. This precaution is intended to prevent you from unintentionally starting the device. d) When not in use always ensure that electrical power tools are kept out of reach of children. Do not let anyone use the device if he or she is not familiar with it or has not read the E-23503_XQ310_Content_LB3.indd 8 21.07.2008 16:26:29 Uhr General safety advice instructions and advice. Electrical power tools are dangerous when they are used by inexperienced people. e) Look after the device carefully. Check that moving parts are working properly and move freely. Check for any parts that are broken or damaged enough to detrimentally affect the functioning of the device. Have dam ...