Art. Nr.: 23501 KompernaSS GmbH Burgstraße 21 D-44867 Bochum Last Information Update · Tietojen tila · Informationsstatus · Tilstand af information · · Stand der Informationen: 07 / 2008 · Ident.-No.: PHKS 1450 LASER-072008-3 PHKS_1450_Cover_LB3.indd 1 30.07.2008 15:10:24 Uhr CIRCULAR SaW PHKS 1450 LASER CirCULAr sAW Operation and Safety Notes käsiPYÖrÖsAHA Käyttö- ja turvaohjeet HANDCirkeLsÅg Bruksanvisning och säkerhetsanvisningar Brugs- og sikkerhedsanvisninger HÅNDrUNDsAV HANDkreissäge Bedienungs- und Sicherheitshinweise PHKS_1450_Cover_LB3.indd 2 30.07.2008 15:10:28 Uhr Before reading, unfold the page containing the illustrations and familiarise yourself with all functions of the device. Käännä ennen lukemista kuvallinen sivu esiin ja tutustu seuraavaksi laitteen kaikkiin toimintoihin. Vik ut bildsidan och ha den till hands när du läser igenom anvisningarna och gör dig bekant med apparatens / maskinens funktioner. Før du læser, vend siden med billeder frem og bliv bekendt med alle apparatets funktioner. , . Klappen Sie vor dem Lesen die Seite mit den Abbildungen aus und machen Sie sich anschließend mit allen Funktionen des Gerätes vertraut. GB / IE / CY FI SE DK GR / CY DE / AT Operation and Safety Notes Käyttö- ja turvaohjeet Bruksanvisning och säkerhetsanvisningar Brugs- og sikkerhedsanvisninger Bedienungs- und Sicherheitshinweise Page Sivu Sidan Side Seite 5 17 29 41 53 67 PHKS_1450_Cover_LB3.indd 3 30.07.2008 15:10:32 Uhr 1 2 8 3 4 7 5 6 13 9 6a 13a 4 6 10 11 12 a 13 14 b 15 C 17 22 16 D e 24 22 F 23 21 20 19 18 PHKS_1450_Cover_LB3.indd 4 30.07.2008 15:10:36 Uhr Table of Content Introduction Proper use .....................................................................................................................Page Features and equipment...............................................................................................Page Included items ...............................................................................................................Page Technical information ...................................................................................................Page 6 6 7 7 7 8 8 9 9 13 13 13 13 13 13 13 14 14 14 15 General safety advice 1. Your working area ....................................................................................................Page 2. Electrical safety ........................................................................................................Page 3. Personal safety .........................................................................................................Page 4. Careful handling and use of electrical tools ..........................................................Page Safety advice relating specifically to this device .......................................................Page Preparing for use Switching on and off ....................................................................................................Page Setting the cutting angle ..............................................................................................Page Setting the cutting depth ..............................................................................................Page Setting the guide fence ................................................................................................Page Switching the laser on and off .....................................................................................Page Working with the circular saw .....................................................................................Page Setting the speed ..........................................................................................................Page Connecting the vacuum sawdust extraction device...................................................Page Changing a saw blade ................................................................................................Page Installing and setting the riving knife ..........................................................................Page Tips and tricks ...............................................................................................................Page Maintenance and cleaning ........................................................................Page 15 Disposal ......................................................................................................................Page 15 Information Service ...........................................................................................................................Page 15 Warranty .......................................................................................................................Page 15 Declaration of Conformity / Manufacturer .................................................................Page 16 GB/IE/CY 5 PHKS_1450_Content_LB3.indd 5 30.07.2008 15:08:43 Uhr Introduction The following pictograms are used in these operating instructions / on the device: Read instruction manual! Observe caution and safety notes! Caution ­ electric shock! Danger to life! Protect electrical devices from moisture! Risk of loss of life by electric shock from damaged mains lead or mains plug! Wear hearing protection, dust protection mask, protective glasses and protective gloves. Caution, laser! Do not expose yourself to laser radiation. Proper procedure and handling. Automatic power delivery system Electronic soft start Do not dispose of rechargeable batteries with your household refuse! Dispose packaging and appliance in an environmentally-friendly way! modification to the device shall be considered as improper use and could give rise to considerable dangers. Not suitable for commercial use. Q V~ n0 W Volt (AC) Design no-load speed Watts (Effective power) Safety class II Risk of explosion! Keep children away from electrical devices! Circular saw PHKS 1450 LASER Q Introduction Please make sure you familiarise yourself fully with the way the device works before you use it for the first time and that you understand how to handle electrical power tools correctly. To help you do this please read the accompanying operating instructions. Keep these instructions in a safe place. If you pass the device on to anyone else, please ensure that you also pass on all the documentation. Q Features and equipment Rotation speed setting wheel Safety lock-out Spindle lock Cutting angle setting clamp Cutting depth setting clamp Automatic blade guard Release lever for the automatic blade guard Base plate ON / OFF switch Sawdust removal connector Wing screw for guide fence Guide fence slot Guide fence Laser unit Laser outlet aperture Proper use For sawing longitudinal, cross and mitre cuts in firmly supported solid wood, plywood, plastic and lightweight construction materials. Please note that the blade pre-installed in the saw as supplied is intended for use with wood only. Any other use or 6 GB/IE/CY 1 2 3 4 5 6 6a 7 8 9 10 11 12 13 13a PHKS_1450_Content_LB3.indd 6 30.07.2008 15:08:45 Uhr Introduction / General safety advice 14 15 16 17 18 19 20 21 22 23 24 Laser ON / OFF switch Cutting depth scale Riving knife Auxiliary handle Drive spindle Mounting flange Clamping flange Clamping screw with plain washer Riving knife mounting Mounting screws Adapter for vacuum sawdust removal WARNING! The vibration level given in these instructions has been measured in accordance with a standardised measurement procedure specified in EN 60745 and can be used to compare devices. Different uses of the device give rise to different vibration levels and in many cases they may exceed the values given in these instructions. It is easy to underestimate the vibration load if the electrical power tool is used regularly in particular circumstances. Note: If you wish to make an accurate assessment of the vibration loads experienced during a particular period of working, you should also take into account the intervening periods of time when the device is switched off or is running but is not actually in use. This can result in a much lower vibration load over the whole of the period of working. Q Included items Circular saw Guide fence Adapter for vacuum sawdust removal Allen key Batteries, micro AAA 1.5 V (for laser) Operating instructions 1 1 1 1 2 1 Q General safety advice WARNING! Read all the safety advice and instructions! Failure to observe the safety advice and instructions may result in electric shock, fire and / or serious injury. KEEP ALL THE SAFETY ADVICE AND INSTRUCTIONS IN A SAFE PLACE FOR FUTURE REFERENCE! Technical information 1450 W 230 V ~ 50 Hz 15 Nm max. n0 1800 - 5000 min-1 210 x 30 x 1.8 x 2.6 mm 0 - 75 mm 0 - 49 mm II / Nom. power input: Rated voltage: Mechanical output: No-load speed: Saw blade: Cutting depth at 90°: Cutting depth at 45°: Protection class: 1. Your working area a) Keep your working area clean and clutter-free. Untidy or poorly lit working areas can lead to accidents. b) Do not work with the device in potentially explosive environments in which there are inflammable liquids, gases or dusts. Electrical power tools create sparks, which can ignite dusts or fumes. c) Keep children and other people away while you are operating the electrical tool. Distractions can cause you to lose control of the device. GB/IE/CY 7 Noise and vibration data: Values determined in accordance with EN 60745 The sound pressure level (A-weighted) of the device is typically 93 dB (A). Uncertainty K=3 dB. The sound level while working can exceed 104 dB (A). Wear ear protection! Evaluated acceleration, typical: Hand / arm vibration ah = 2,309 m / s2 Uncertainty K = 1,5 m / s2 PHKS_1450_Content_LB3.indd 7 30.07.2008 15:08:45 Uhr General safety advice 2. Electrical safety To avoid danger to life from electric shock: a) The mains plug on the device must match the mains socket. The plug must not be modified in any way. Do not use an adapter plug with devices fitted with a protective earth. Unmodified plugs and matching sockets reduce the risk of electric shock. b) Avoid touching earthed surfaces such as pipes, radiators, ovens and refrigerators with any part of your body. There is an increased risk of electric shock if your body is earthed. c) Keep the device away from rain or moisture. Water entering an electrical device increases the risk of electric shock. d) Do not use the mains lead for any purpose for which it was not intended, e.g. to carry the device, to hang up the device or to pull the mains plug out of the mains socket. Keep the mains lead away from heat, oil, sharp edges or moving parts of the device. Damaged or tangled mains leads increase the risk of electric shock. e) When working outdoors with an electrical power tool always use extension cables that are also approved for use outdoors. The use of an extension cable suitable for outdoor use reduces the risk of electric shock. f) Use a residual current device (RCD) for protection if operating the electrical power tool in a moist environment is unavoidable. The use of an RCD reduces the risk of electric shock. 3. Personal safety a) Remain alert at all times, watch what you are doing and always proceed with caution. Do not use the device if you are tired or under the influence of drugs, alcohol or medication. One moment of carelessness when using the device can lead to serious injury. b) Wear personal protective equipment and always wear safety glasses. The wearing of personal protective equipment such as dust masks, non-slip safety shoes, safety helmets or ear protectors, appropriate to the type of electrical power tool used and work undertaken, reduces the risk of injury. c) Avoid unintentional operation of the device. Check that the electrical power tool is switched off before you connect it to the mains, pick it up or carry it. Accidents can happen if you carry the device with your finger on the ON / OFF switch or with the device switched on. d) Remove any setting tools or spanners before you switch the device on. A tool or spanner left attached to a rotating part of a device can lead to injury. e) Avoid placing your body in an unnatural position. Keep proper footing and balance at all times. By doing this you will be in a better position to control the device in unforeseen circumstances. f) Wear suitable clothing. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves clear of moving parts. Loose clothing, jewellery or long hair can become trapped in moving parts. g) If vacuum dust extraction and collection devices are fitted do not forget to check that they are properly connected and correctly used. The use of these devices reduces the hazard presented by dust. 8 GB/IE/CY PHKS_1450_Content_LB3.indd 8 30.07.2008 15:08:45 Uhr General safety advice 4. Careful handling and use of electrical tools a) Do not overload the device. Always use an electri ...